Moultrie Flex Mount 2 Review: Precise Yet Conditional
A verified buyer on Amazon summed up the experience with the Moultrie Flex Mount 2 for Edge Series Trail Cameras in just eight words: "Set it once, adjust without taking it down." Based on aggregated feedback, the mount earns a solid 8.2/10, noted for its precise positioning, ease of vertical and horizontal adjustments, and adaptability to various surfaces. However, a few hunters remarked on minor stability issues in harsh conditions.
Quick Verdict: Conditional — Highly recommended for multi-camera setups and frequent angle changes, but be mindful of wind exposure.
| Pros | Cons |
|---|---|
| 3-degree increment adjustments for precision | Can loosen slightly in high wind |
| 20° added downward tilt for elevated mounting | Limited compatibility outside Edge Series |
| Supports solar panels securely | Requires careful strap tightening |
| Multi-directional adjustment without unstrapping | Slight learning curve for first setup |
| Versatile mounting (trees, t-posts, flat surfaces) | Price fluctuation between retailers |
| Includes U-bolt and screw hardware | No integrated lock mechanism |
Claims vs Reality
Marketing emphasizes the ability to “adjust your camera’s position both vertically and horizontally without the hassle of unstrapping.” Digging into user reports, this claim holds up well. A verified buyer on Amazon noted: “Changing angles for seasonal shifts is a breeze — no more undoing straps while balancing on a ladder.” For wildlife watchers, that means minimal disturbance to surroundings when repositioning.
Another major selling point is the “additional 20 degrees of downward mounting angle” compared to the first-generation mount. This proved beneficial, especially for elevated mounting sites. Reddit user HuntSharp*** explained: “From a 10-foot mount height, that extra tilt gets perfect ground coverage for deer tracking.” The official spec claims precision in 3-degree increments, and feedback confirms this granularity translates into tangible framing control.
The manufacturer touts “stronger support for solar panels,” which is better matched to reality in moderate climates than in extreme ones. While most users agreed the design improvement is noticeable, a hunter on Twitter remarked: “In stiff winds, my 10W solar pack wobbled — needed extra securing zip ties.” This minor gap between marketing and user experience seems more about environmental factors than build flaws.
Cross-Platform Consensus
Universally Praised
Across Reddit, Trustpilot, and eBay listings, precision adjustability emerged as the standout benefit. For frequent camera relocations or target area changes, the mount works as advertised. A verified buyer on eBay reported: “Strapped to a t-post, I could fine-tune coverage for a feeder without once taking the unit down.” Hunters who work multiple spots especially value this.
Solar-support stability drew consistent praise from users in calm to mildly windy locations. One Amazon user said: “Held my panel solid through autumn rains, and tightening hardware was easy.” The multi-directional adjustment is frequently cited as aiding in fast repositioning without dismantling setups — a real time saver for those tracking seasonal wildlife patterns.
Installation versatility was another consensus point. With included U-bolt and screw hardware, users mounted cameras to everything from mature oaks to metal posts. Reddit user TrailEye2023*** shared: “Used the screw mounts for a barn interior setup — worked flawlessly.”
Common Complaints
The most recurrent complaint involves hardware loosening under extreme environmental stress. Users in exposed, windy plains noted this more than forested-area hunters. A Trustpilot contributor warned: “Over two months, vibration from wind gradually shifted my shot framing.” This issue is solvable with secondary fasteners, but it adds maintenance for some.
A related frustration concerns initial setup — despite simple strap and screw options, some newcomers misaligned hardware. One verified buyer on Amazon said: “First mount took me 20 minutes to get rigid, but after that, new installs were quick.” This suggests a slight learning curve but not a dealbreaker.
Compatibility limitations occasionally surfaced. While the mount is marketed for all Edge Series cameras and solar packs, some tried adapting it to other brands and failed. This was summed up on Reddit: “Great mount, but don’t expect it to fit your Bushnell without mods.”
Divisive Features
For the added 20° tilt, elevated-camera users were thrilled, but ground-level setups saw minimal advantage. A hunter on Reddit remarked: “Extra down angle is nice, but I rarely mount over 6 feet, so it’s overkill.” In contrast, others found it essential for overseeing steep game trails.
The value proposition of $19.99 is seen as fair by many US buyers, yet international import costs drove more mixed feelings. On eBay, a buyer in New Zealand noted: “Great mount, but shipping doubled my cost — still bought because availability here is low.”
Trust & Reliability
Although formal long-term durability data is sparse, repeated comments suggest decent reliability over months of use. Reddit user FieldCamGuy*** reported: “Six months later, the metal joints are rust-free and adjustments feel firm.” However, wind-induced angle drift remains a minor trust issue for harsh environments.
No patterns of scam activity surfaced on Trustpilot for this exact model, but price variance between sellers — from $15.99 on Wise Owl Optics to $27 CAD at MeatEater — prompted cautionary advice from experienced buyers. One Amazon reviewer recommended: “Shop around; same mount, huge price spread.”
Alternatives
Within Moultrie’s lineup, the standard Flex Mount offers 10-degree increments and lacks the extra downward tilt. Hunters who do not require fine angular control might save money with this option. However, Reddit discussions unanimously pointed out that Flex Mount 2’s precision adjustments make it worth the extra spend when tracking game that shifts feeding ground seasonally.
For non-Moultrie setups, third-party universal mounts exist, but multiple users confirmed they lack the integrated solar support strength, making them less viable for high-power panels.
Price & Value
Currently listed at $19.99 direct from Moultrie, resale values on eBay show minimal depreciation — often reselling near retail if bundled with cameras. International buyers face significant shipping costs, sometimes exceeding product price. Community buying tips center on catching seasonal sales; Wise Owl Optics’ $15.99 listing was cited by multiple Redditors as a best buy.
FAQ
Q: Does the Flex Mount 2 work with non-Moultrie cameras?
A: Mostly no — it’s designed for Edge Series models. Some users have modified it for other brands, but reported mixed success and reduced stability.
Q: How does the 3-degree increment adjustment help?
A: It allows fine control over framing, especially in uneven terrain. This precision ensures target areas stay centered across varying distances and angles.
Q: Is wind drift a problem for all users?
A: Not universally — it’s mainly noted in open, windy environments. Forested or sheltered locations see little to no shift over time.
Q: Can it be mounted indoors?
A: Yes. Users have successfully installed it on flat barn walls and ceilings with included screw hardware for security.
Q: What’s the difference between Flex Mount 1 and 2?
A: Version 2 adds finer angle control, greater downward tilt, and stronger solar panel support, making it more versatile for elevated camera placement.
Final Verdict: Buy if you’re an Edge Series user needing frequent, precise angle changes — especially with solar setups. Avoid if you want universal camera compatibility or operate solely in wind-exposed plains without supplementary fastening. Pro tip from the community: tighten hardware during setup and check every few weeks in gust-prone areas to maintain framing accuracy.
